2021-04-15
No. | Fault | Causes and remedy |
1 | Sealing is not ideal | heat sealing line is not strong, the heating time should be extended, if the seal appears melt wear Phenomenon, it should shorten the heating time, or for failing to wear a compression caused by melting. |
2 | Sealing appear shrunken " | 一、 caused by high temperature, should be to ensure sealing fastness premise, shorten the heating time; 二、Caused by insufficient cooling time should be extended cooling time. |
3 | After a period of use Temperature | Because when you start using the machine at room temperature, the initial work will absorb part of the heating heat Amount, the machine has a certain temperature is normal at this time as long as the balance of the heating time can be shortened slightly. |
4 | Power LED is not lit, Electric wire without heating | Check that the power switch is turned on; fuse is intact. |
5 | Power indicator light, heat indicator does not light, electric wire without heating | Depress the foot pedal, the trip switch is working, adjust the method described in 4.3 |
6 | Boot normally hot electric wire | First off immediately, check the limit switch, if damaged, adjustment method described in 4.3 |